$50.000.000.00

Polishing Knowledge Of Aluminum Wheel Polishing Machine

  • Province: Preah Vihear
  • Street: Shuanglin Industrial Park, Huzhou City, Zhejiang Province
  • City: Huzhou
  • Phone number: 86-572-3621388
  • Website: https://www.zhongyun-machine.com
  • Rooms: no
  • Bedroom(s): no
  • Bathroom(s): no
  • Parking: On street
  • Floors: no
  • Listed: 16/07/2019 3:02 pm
  • Expires: 51 days, 12 hours

The reason why Aluminum Wheel Polishing Machine can produce incomparable light is mainly by grinding, that is, removing the scratches by the friction material, and relying on the gloss of the polishing agent to make up for the defects of the paint surface. Polishing principle:

1. The surface is rough and uneven: the incident angle and the refraction angle of any light are different, resulting in a decrease in surface brightness.

2, the surface is smooth: specular reflection, the injection angle and the reflection angle are the same, the highest reflection brightness can be obtained. Therefore, the beauty construction must first flatten the paint surface to have the best surface brightness and protective layer.

Method of operation: The abrasive used in the grinding operation is carried out in the rubbing operation with the polishing machine and the abrasive. Due to the heat generated by the friction, the “water” and “solvent” components contained in the abrasive are reduced, and finally the abrasive becomes Dry powder. In the initial stage of grinding, the abrasive acts as a lubricant, and there is almost no grinding force. The abrasive is applied thinly with the rotation of the polishing machine; the moisture and solvent contained in the grinding solvent will slowly protect the abrasive particles. Drying, grinding particles because of the protection of the abrasive particles with water and solvent will make the grinding time longer; water, solvent is evaporated due to friction and heat, the content is also reduced, can not protect the abrasive particles, can not be protected abrasive particles Gradually began to break, the grinding power decreased, but the gloss appeared. In order to use this time zone effectively, in order to prevent the heat from being carried out, if the grinding is performed with excessive force, it is easy to heat up, and the abrasive is almost completely dried, not only the abrasive becomes ineffective, but also The abrasive particles are left with scratches.

information about aluminum wheel polishing machine : https://www.zhongyun-machine.com/product/wheel-polishing-machine/

31 total views, 1 today

  

Listing ID: 6315d2d847345368

Report problem

Processing your request, Please wait....